[. . . ] Finish pouring concrete into hole leveling it with top of cardboard form. STEP 6. Push anchor system into concrete until anchor template makes contact with concrete. Agitate anchor system before final placement to work out voids in concrete. Immediately use a level to square and level anchor system to playing surface. [. . . ] STEP 4. STEP 5. STEP 6. Note: STEP 7. Bolt post to anchor system. Locate remainder of anchor hardware pack and place one 5/8" flat washer onto each anchor bolt. Lift post onto anchor system and assemble the following: 5/8" flat washer, X3" split washer, XI" nut and anchor bolt cap. To ease assembly of backboard in step 8, you will need to lower arm until it makes contact with safety stops located on post. Insert 4 l/2" bolt through backboard, lower arm, l/2" nylon washer, l/2" flat washer, I/2" lock nut. Tighten. Reminder: Do non over tighten pivot points. Nate: STEP 8. STEP 9. Mount backboard onto upper arm. Insert 4" bolt through backboard, upper arm, l/2" nylon washer, l/2" flat washer, l/2" lock nut. STEP 11. Remove protective backboard covering, Mount rim and rim pad to backboard. Insert hex bolt through flat washer, rim, rim pad, backboard, another flat washer, split washer and hex nut. Attach rim cover plate using small 1, screws found in hardware bag furnished with rim. Using a pencil, place a mark on the actuator right below the actuator sleeve. While maintaining decal in a vertical position, line up 10 foot mark on decal with mark you made on actuator and carefully adhere decal to actuator. STEP 13. STEP 14. STEP 15. CONGRATULATIONS ! You have just completed assembly of the finest residential basketball system in the country. `- Pati~2. Day 5. \ anchor bolt cap , I5/S" "!A +--- 5/S" split washer i- For imtdlatim quertKaF call: I4SWJSA-GOAL. This model is B Gorilla SR Care Information Backboard Items needed to clean backboard: - 100% cotton soft cloth. (only) - Mild dish washing liquid for soap - Luke warm water - Mild plastic polish to minimize scratches Rinse backboard with lukewarm water. Wash gently with a 100% cotton soft cloth, lukewarm water and mild soap. To minimize scratches and minor abrasions to your backboard, apply a mild polish such as Johnson's Paste Wax, Novus Plastic Polish #I or Mirror Glaze Plastic Polish. Strong cleansers will damage backboard and void warranty. Rim HANGING ON THE RIM WILL VOID YOUR WARRANTY. [. . . ] Escalade Sports assumes no other obligations or liability on the part of the purchaser, and Escalade Sports neither ass. umeS nor authorizes any other person to assume for it any other liability in connection with the goods sold. What is Not Covered by This Warranty . Any memhandise subjected to abuse, negligence, improper installation, vandalism, acts of God, alteration of product, or any other events beyond the control of Escalade Sports. Paint or rusted parts Paint kits will be available to assist in normal maintenance. HANGING ON RIM WILL VOID YOUR WARRANTY: Rims are not warranted for any defects other than workmanship. [. . . ]